[OntVFR] Sena Bluetooth 10S communicator

mike mckinnon 2bikemike at gmail.com
Wed Mar 20 09:35:23 EDT 2019


And in my experience with the cardo you need to protect the microphone from
wind noise because that activates the transmission from your unit and the
other person hears this wishing noise in their head phones and makes it
impossible to to respond while the other mic is open

On Wed, Mar 20, 2019, 9:31 AM Andrew Carlyle <carlyle.andrew at gmail.com
wrote:

> I have a Sena but haven't used it for bike to bike communication. But I
> have used a cardo extensively and I think the functions are pretty similar.
> I believe its voice activated so you just talk and it starts working. No
> button to push.  That is how the cardo systems work and I think Sena is the
> same. You may have to speak loudly to get it to "wake up" and start
> transmitting but once you get it working you can just talk normally.
>
> On Wed, Mar 20, 2019 at 8:49 AM Levente Szabo <v4vfr at hotmail.com> wrote:
>
>> Good morning,
>>
>> Friend of mine bought the Sena 10S system and I am thinking to get one as
>> well.
>>
>> Question: after you pair the two of them together to communicate with
>> each other do you have to push a button to initiate a talk or both systems
>> are always on and you just have a conversation with each other?
>>
>> Thanks,
>> Levi
>>
>> _______________________________________________
>> OntVFR mailing list
>> OntVFR at vfr.on.ca
>> http://vfr.on.ca/mailman/listinfo/ontvfr_vfr.on.ca
>>
> _______________________________________________
> OntVFR mailing list
> OntVFR at vfr.on.ca
> http://vfr.on.ca/mailman/listinfo/ontvfr_vfr.on.ca
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://vfr.on.ca/pipermail/ontvfr_vfr.on.ca/attachments/20190320/6867083e/attachment-0002.html>


More information about the OntVFR mailing list